Description:

Learn What's New with the E6000 in Release 11.0!

• Channel Density: Improvements in Release 11.0
• Receive Channel Set (RCS) Load Balancing for OFDM Channels for I-CCAP
• DBC Signaling for OFDM Channel Changes for I-CCAP
• Sending Supervision over Extended Number of DS Channels 
• Video SC-QAM Dual Symbol Rate Support
• Service-Level Redundancy (SLR) for SDV Sessions for I-CCAP
• Upstream Service Flow Scaling Increase for R-PHY
• Eight OFDMA Channels per Cable-mac for I-CCAP
• 25 kHz Subcarrier Spacing for OFDMA for I-CCAP
• Latency-Based Random Early Detection (LB-RED) per Service Flow
• Proactive Grant Service in Low-Latency DOCSIS (PGS LLD) 
• PNM US Triggered Spectrum Capture (UTSC) IdleSID Trigger Mode for I-CCAP
• PNM US Triggered Spectrum Capture (UTSC) IdleSID Trigger Mode with Dynamic Pseudowires for R-PHY 
• PNM US Triggered Spectrum Capture (UTSC) FreeRun Trigger Mode with Repeat Capture
• Concurrent Access of PNM UTSC with Static Pseudowire for R-PHY
• IPv4-based CIN for R-PHY 
• TFTP Proxy Enhancements: Additional TFTP Options
• IPv6 and Dual Stack Support for TACACS+ 
• IPv6 Support for Service Flow to VRF Mapping with Device Classes for I-CCAP
• MP-BGP Multi-VRF Support Expansion for I-CCAP
• "configure mpls ip propagate-ttl" CLI Command Support for I-CCAP
• Counts of CMs per Downstream OFDM Profile Display Support
• Codeword Counter per IUC per CM in OFDMA Display Support for I-CCAP
• Optional Behavior for Decrementing of the cadUsOfdmaCmProfStatErrorCnt MIB Object for I-CCAP
• Remove the Hardware Deviation Fields from the "show version detail" CLI command for I-CCAP
• Include "show version chassis detail" In All Variations of the 'show tech-support" CLI Command 
• CAM Sparing Recovery Control: Additional Events (Addition of Failure Events into the White List Feature) for I-CCAP
• Enhanced Syslog Event Reporting for I-CCAP
• SNMPv3 Logging for Set Commands for I-CCAP

Cost:  Free

Presented by: Tom Gibson