Product Classification
Product Type
1-BTS:1-ANT (Uniplex) | Tower mounted amplifier
General Specifications
Color
Gray
Modularity
2-Twin
Mounting
Pole | Wall
Mounting Pipe Hardware
Band clamps (2)
RF Connector Interface
4.3-10 Female
Dimensions
Height
280 mm | 11.024 in
Width
175 mm | 6.89 in
Depth
98 mm | 3.858 in
Mounting Pipe Diameter Range
50–120 mm
Outline Drawing
Click on image to enlarge.
Close Modal
Electrical Specifications
License Band, Band Pass
SDL 1400
License Band, LNA
DCS 1800 | IMT 2100 | IMT 2600
Electrical Specifications, dc Power/Alarm
dc Switching/Redundancy
Yes
Lightning Surge Current
10 kA
Lightning Surge Current Waveform
8/20 waveform
Voltage
7–30 Vdc
Alarm Current, CWA Mode
190 mA ±15 mA
Electrical Specifications, AISG
AISG Connector
8-pin DIN Female
AISG Connector Standard
IEC 60130-9
Protocol
AISG 2.0
Voltage, AISG Mode
10–30 Vdc
Electrical Specifications
Sub-module
1 | 2
1 | 2
1 | 2
Branch
1
1
1
Port Designation
ANT
ANT
ANT
License Band
SDL 1400, Band Pass
DCS 1800, LNA
IMT 2100, LNA
Electrical Specifications, Band Pass
Frequency Range, MHz
1452–1492
Insertion Loss, typical, dB
0.35
Return Loss, minimum, dB
18
Input Power, RMS, maximum, W
200
Input Power, PEP, maximum, W
100
3rd Order PIM, typical, dBc
-162
3rd Order PIM Test Method
Two +43 dBm carriers
Electrical Specifications, Rx Uplink
Frequency Range, MHz
1710–1785
1920–1980
Bandwidth, MHz
75.00
60.00
Gain, nominal, dB
12.0
12.0
Noise Figure, typical, dB
1.7
1.6
Output IP3, minimum, dBm
12
12
Return Loss, minimum, dB
18
18
Insertion Loss - Bypass Mode, typical, dB
2.5
2.3
Return Loss - Bypass Mode, typical, dB
16
16
Electrical Specifications, Tx Downlink
Frequency Range, MHz
1805–1880
2110–2170
Bandwidth, MHz
60.00
60.00
Insertion Loss, typical, dB
0.30
0.30
Return Loss, minimum, dB
18
18
Input Power, RMS, maximum, W
200
200
Input Power, PEP, maximum, W
1,000
1,000
3rd Order PIM, typical, dBc
-162
-162
3rd Order PIM Test Method
Two +43 dBm carriers
Two +43 dBm carriers
Block Diagram
Click on image to enlarge.
Close Modal
Mechanical Specifications
Wind Speed, maximum
200 km/h (124 mph)
Environmental Specifications
Operating Temperature
-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity
Up to 100%
Corrosion Test Method
IEC 60068-2-11, 30 days
Ingress Protection Test Method
IEC 60529:2001, IP67
Packaging and Weights
Included
Mounting hardware
Volume
4.8 L
Weight, net
8 kg | 17.637 lb
Regulatory Compliance/Certifications
Agency
Classification
ISO 9001:2015
Designed, manufactured and/or distributed under this quality management system